|
 |
 |
FOR OPTIMAL RESULTS
Install temperature for all vinyl applications is 60-80 F degrees. If you
install when it is colder or hotter than this you may have dissatisfactory results.
Applying in full sun or heat can greatly increase the number of air pockets that get trapped
in between the surface and vinyl. Please
try to stay within this window of temp as you will have best results.
Prepare the surface by removing all residues such as tar, tree sap, bugs, or any other
debris.
Do not install in direct sunlight.
TOOLS REQUIRED
Paper towel, Masking Tape, Measuring Tape, Razor Blade, Heat Gun (or blow dryer), and a Squeegee (or any type of credit card).
For large graphics or vinyl roof overlays on vehicles, a soapy water mixture can be used to help with installation.
For every 32oz of water use 2 small drops of regular dish soap (Dawn, Joy, Palmolive) does the trick - FOR BODY GRAPHICS, VISORS, and
VINYL ROOF OVERLAYS
Choose from the following instructions
[Decal Installation] [Wall Art Installation] [Graphics Installation]
[Vinyl Roof Overlay Installation]
[Visor Installation] [Windshield Decal Installation] [Decal Removal] |
|
|
|
|
|
|
|
|
|
Shopping Cart: 
