Decal consists of 3 layers
* the top layer is the application tape
* the middle layer is the actual decal vinyl
* the bottom layer is the backing wax paper
1. Clean and prep the surface by removing any residues. NOTE:NEVER USE AMMONIA BASED
CLEANERS (i.e. Windex). It will out gas for a couple of weeks and create bubbles under
the decal. Which will result in accidental decal peeling.
2. WITHOUT PULLING OFF THE BACKING PAPER, Apply masking tape along the top of your
decal and place on the surface area creating a hinge.
3. Flip Decal up and pull backing paper off.
4. Gently bring the decal back down and squeegee the decal onto the window from the top
down forcing out the air bubbles.
5. Your decal will now be secured onto your surface area. Gently remove application
tape by pulling straight back, leaving the decal on the surface. You are now ready
to sport your new decal!
Shopping Cart: 
